PSI-5000 - New Model: PT-L3-C
High Level Output Pressure Transducer
PSI-100 - New Model: PT-L9-C
Standard Pressure Transducer
    Features
  • Accuracy (Linearity, Hysteresis, Repeatability): ±0.25% F.S. (B.F.S.L.)
  • Hybrid Electronics
  • Ranges: vacuum - 500 psi to 0-10,000 psi
  • Input 9.5 to 33.0 VDC unregulated
  • True 0-5 VDC, can cross zero
Download datasheet
    Features
  • Accuracy (Linearity, Hysteresis, Repeatability): ±0.25% F.S. (B.F.S.L.)
  • Hybrid Compensation Network
  • Ranges: vacuum - 500 psi to 0-10,000 psi
  • High Burst Pressure
Download datasheet
PSI-4/20 - New Model: PT-L1-C
Two-Wire Pressure Transmitter
PSI-10000 - New Model: PT-L10-C
High Level Output Pressure Transducer
    Features
  • Accuracy (Linearity, Hysteresis, Repeatability): ±0.25% F.S. (B.F.S.L.)
  • 4-20 mA Output
  • High Overpressure Capability
  • Hybrid compensation circuit
  • Ranges: vacuum - 500 to 0-10,000 psi
  • Zero and span adjustments
  • CE approved
Download datasheet
    Features
  • Accuracy (Linearity, Hysteresis, Repeatability): ±0.25% F.S. (B.F.S.L.)
  • True 0-10 VDC, can cross zero
  • Zero and span adjustments
  • Hybrid compensation circuit for reliability
  • Ranges (Gage or Absolute): vacuum to 10,000 psi
Download datasheet
PT-400
Industrial Pressure Transmitter
PT-500
Submersible Liquid Level Transmitter
    Features
  • Available ranges from 0 up to 20,000 psi
  • Standard outputs: 4-20 mA, 0-5 VDC, 0-10 VDC
  • 0.25% BFSL accuracy; 0.5% BFSL accuracy on ranges greater than 5000 psi (voltage output only)
  • cCSAus hazardous location approved
    0-5 VDC, 0-10 VDC
    Class I, Div. 2, Groups C & D
    Class I, Zone 2, Group IIB
    4/20 mA
    Class I, Div. 1, Groups C & D
    Class I, Zone 0, Group IIB
Download datasheet
    Features
  • Simple to install liquid level measurement
  • High precision, solid state signal: 4-20 mA
  • Exclusive, removable and reusable cage saves you money when replacing the sensor (patent pending)
  • 1/2" NPTM on cable end for use with conduit
  • cCSAus hazardous location approved Class I, Div. 1, Groups C & D Class I, Zone 0, Group IIB
Download datasheet
SANITARY
Standardized Fitting Designs
PWC - Replaced by PTL1 & PTL3
Conditioned Output Pressure Transducer
    Features
  • 316 Stainless Steel Wetted Surfaces
  • Millivolt, 4-20 mA, or 0-5 Volt Output
  • Pressure Ranges: 0-15 Through 0-1000 psi
  • Also Available As a Digital Gauge
  • Food-Grade Silicon Oil Fill
  • Fit Tri-Clover brand clamps and fittings
    Features
  • Accuracy (Linearity, Hysteresis, Repeatability): ±0.5% F.S. (B.F.S.L.)
  • 4/20 mA or 0-5 Vdc Output
  • User Accessible Zero and Span Adjustments
  • Ranges (Gage or Absolute): 0-15 to 0-5,000 psi

BACK                                                          HOME